What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 03.07.2025 00:13

but this device (an Inductor) … impedes the rapid changes in the current.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
There are three different concepts here that are getting confused.
These glowing axolotls may hold the secret to human limb regeneration - MSN
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
One is “what exactly is in a ‘surge protector’ ? ”
the problem then depends on "how fast does the fuse operate?".
What does a fuse do?
[image of Common-mode choke]
Edit 2024–10.
Win a signed pink cycling jersey of Giro winner Simon Yates - Team Visma
This is 'the assistant's answer'
It also is a device that limits the change in current flow.
The third is lightning and “how it gets conducted into a home.”
Pac-12’s new media rights deal will feel familiar to San Diego State fans - San Diego Union-Tribune
a photo is worth a thousand words.
So, the voltage could go up to 500 volts, and the fuse will not open up.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
A Common Stimulant Could Hold the Key to Preventing Sudden Infant Death Syndrome - SciTechDaily
but I think this circuit , shows a few more pieces.
2024–10–10[John johnson John Johnson ]
what exactly is a ‘surge’ protector?
What is the reason behind some people wearing trunks instead of speedos when swimming in pools?
But… the neutral is now “floating” because of the 1 ohm resistance.
2024–10–14 [Omar Gharbi Omar Gharbi ]
It seems Mohan does not understand the difference between a comment and an Answer.
I Sampled All the Best Mushroom Gummies—Here’s What I Found - WIRED
This device then solves the entire problem.
He then asserts :
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Pharmacy Mixes Up 9-Year-Old’s ADHD Medicine, Gives Him Opioid More Powerful Than Morphine - AOL.com
Because the load is inductive, the current lags the voltage.(by a bit).
Now when you have a certain ac resistance, then a current flows in a loop.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Mario Kart World online update sparks backlash with subreddit now banning posts - My Nintendo News
(Dc diagram shown, AC is similar).
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Imanaga Rehab, Boyd Shoulder, Reliever Swaps, and Other Cubs Bullets - Bleacher Nation
But it can get overloaded, and no longer works.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
At least they know the answer if they wanted it.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
The MOV will conduct when the voltage exceeds 50% of line voltage.
These are simplified answers to the original question, and does not change anything I wrote above.
An AC voltage/ current source, and an ac inductive load.
[old diagram got deleted by accident]
One
A fuse is a non-resetable over current circuit protector.
At one ohm, the resistor has a maximum of 1 watt power.
A circuit breaker is similar, but is resettable.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
This one hit behind the barn.
This is where the MOV conducts again, and dissipated the energy.
He then describes the function of a fuse.
In schematic diagrams this is the symbol for a fuse:
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
The bolt then partially travels down the line to your home.
There are two important concepts here.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
so, what happens?
This is where this question deviates from being a 'generic' question, and becomes more specific.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Here is a simplified AC power diagram.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
For this case there are devices called Metal oxide varistors (MOV).
nine
2024–10–16 [ OO OLAOYE OYEBODE ]
He then describes Rainy Season and Lightning.
eight
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
What is lightning?
Barnstars:
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
I post the exact comment here.
Upvotes:
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
First Sentence:
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
The other is “what does a “fuse” do?”
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi